Off-Grid Wind turbine Controller 5KW 48VDC/120VDC/240VDC

1. Suitable for Wind generator system 5KW 48V, 120V, 240V 2. Good quality and LCD display 3. Equipped with external dump load

Off-Grid Wind turbine Controller 5KW 48VDC/120VDC/240VDC

1. The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users’ technical requirements.

2. The big screen LCD display. Clearly present the working status of the wind turbine, solar panel, battery and controller.(Wind turbine voltage, current, power display ;solar voltage, current, power display, battery charging current, voltage, charging power, power display.)

3. Two sets of control systems: PWM constant voltage system and three-phase dump load system.

4.PWM constant voltage control is 120% of the rated power of the wind turbine . In case exceeding of PWM’s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.

5. Under the circumstances of disconnecting or damage of the battery, the three-phase dump load will start automatically to avoidt heidling for wind turbine and the occurrence of runaway accident.

6.Under the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.

7.The protection function of reverse connection, disconnection and damage-resisting of the battery will be applied.

8. Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.

9Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage,it stops three-phase dump load to recharge battery automatically.

10. For the different wind turbine type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.

11The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

12. Ammeter and voltmeter indication: Indicate the charging current and voltage of the battery.

13. The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.

Type	5KW-48Vdc
Battery	48Vdc
Function	Charge, control
Operating environment	Temperature -10-40°C,humidity≤80%
PWM constant voltage	>56Vdc
3-phase dump load voltage of the wind turbine	58±1Vdc
Recovery charging voltage of the wind turbine	54±1Vdc
Low-voltage of the battery	40±1Vdc
Self-provided connecting wire of the battery	>20mm²
PWM dump load fuse	125A
Charging fuse	160A
Size of the controller	550*400*230mm
Weight of the controller	Kg
Size of the dump load	660*510*450 mm
Weight of the dump load	31 Kg

Off-Grid Wind turbine Controller 5KW 48VDC/120VDC/240VDC